Landgarden Outdoor Misting Cooling System,33ft Misting Line,11 Brass Mist Nozzles for Patio Garden Greenhouse

Perfect

Easy to install fallow directions it works well, I also got an extension that filters hard water to help keep it good!

This misting system does a decent job at providing relief on hot days, especially for outdoor spaces like patios or greenhouses. The pre-assembled design made it fairly simple to set up, and the mist output is effective at cooling the area. It’s great for keeping plants hydrated or adding some fun to a trampoline during summer.However, I did notice some minor issues. The misting nozzles tend to leak slightly which can create small puddles. Additionally, the mist line feels a bit flimsy, so I’m not sure how well it will hold up over time with frequent use,That said, the brass adapter and nozzles are nice touches, and it gets the job done. If you’re looking for an affordable misting system for occasional use, this works well enough, but I’d suggest spending a little more for something sturdier if you need long-term durability. If you’re on a budget and just need a quick cooling solution, this can work. However, I’d recommend looking into a more durable option if you want something truly hassle-free for daily use.

The media could not be loaded. Works as advertised. You need to assemble the whole system. If you are not handy, it may be a challenge, but it was super easy for me. I've got mild carpentry, plumbing, and electrical experience, so it was straight forward to me without the instructions.Instructions are in very poor, broken English. They skimped on paying a translator. But I didnt need them so didn't care much.I've got this hooked up a 2 stage, whole house water filtration system that I have connected to my hose spigot for my garden. We do not have a hard water issue in my area, so between the softer water and water filter, I do not anticipate it clogging any time soon.It comes with a T splitter I'd need be. I did not need it. One of the emitters was missing one of the pieces that holds the water line in, so I took one out of the T splitter and made it work. I was a bit irritated at this but they also send an extra emitter nozzle which I ended up needing because I messed up putting the Teflon tape on the nozzle and it got inside the nozzle and clogged it and I cannot get it out. So because they made my life easier by sending that extra nozzle, I wasn't upset about the missing piece that holds the hose in the emitter. After the fact I realized they send 16 emitters and 17 nozzles, while the listed stayed 15, so I'm stoked with them sending extra in case you have issuesDefinitely use the Teflon tape on the nozzles or risk them leaking. If you have the nozzle head facing down and the threaded side up, you wrap the Teflon tape clockwise. Going the other way can result in "unwinding" the tape as you screw it in.Overall I'm satisfied with the product on day one. I'll update if things change but only issue I see is the nozzles getting clogged which is of no fault to the company. That's a water supply issue and any misting nozzle will need maintenance at some point or another. It also included a sediment filter where you hook it up to a spigot/hose. Won't be enough to stop hardwayer build up but will stop bigger particulate.Overall I'm satisfied with this product and my chickens are finally not panting any more

This product is close to garbage. I gave it 3 stars because it had held up for about a month, but that may change.I had 3 issues with this so far.1. The threading inside of the nozzle T's are very coarse and do not properly seal with the brass nozzles. I had to use nylon tape to properly seal the nozzles or else I would get random streams of water squirting from the threading. And BTW, use a different tape than the tape supplied. The supplied tape is so thin and stringy that it would take 3it's the wraps compared to tape I had bought from a local hardware store.2. The provided clips that resemble badge holders were almost all defective and broke where the plastic attaches to the "metal" material. Looks like the QC was poor, in my opinion, and many of the plastic pieces tore off with very little effort. I was able to salvage a few to still use.3. The clasps that hold the 1/4" tubing on the nozzle T adaptors need to be completely pushed in, even further than just inserting to what seems to be fully inserted. I ended up needing to depress the release flanges on both sides and push the tubing in with some force, then pulling the flanges out and pushing again. I have worked with these types of adaptors before, and most just need to be pushed in until they stop, without pulling the release flanges out. These have grip, but do not seal properly unless the flanges are pulled out, with the tubing installed.I gave 3 stars because, even though there are Quality Control issues, the product DOES work.To get a proper misting effect for a covered patio, it is best to have the nozzles/sprayers at least 4' from where you are sitting. 6' is the recommended by the manufacturer.If the threading was a bit tighter in tolerance, the tape would not be needed. And if the plastic card-clips were a bit more sturdy, they would hold up better.This is all just from my experience.